- 日本大澤(OSAWA)
- 日本kokusan科庫森
- 日本YUASA SYST...
- HPOWER航裕電源
- 中國YHDA怡合達
- 日本KYOWA共和
- 韓國SP
- 3nh三恩時
- 美國SIMCO-ION思...
- 美國3M
- FRK法納克
- 意大利MASTER瑪斯特
- 日本KANAGAWA神奈...
- 日信SPAIR
- 日本高柳TRINC
- 日本HIMEJIRIKA...
- 分光JASCO
- 日本KHK小原
- 中央發明chuhatsu
- 日本IEI巖下
- 八光HAKKO
- 日本榮工舍EIKO
- 日本MALCOM馬康
- 日本FBC古川物產
- 日本鈴木SUZUKI
- 美國Internatio...
- 日本KITO鬼頭
- 日本杉崎CEDAR思達
- 日本扶桑精機FUSOSE...
- SIMCO思美高
- KONICA MINOL...
- 新寶shimpo
- 理化工業RKC
- 菊水KIKUSUI
- 淀川電機YODOGAWA
- HORIBA掘場
- VESSEL威威
- MALCOM馬康
- SUIDEN瑞電
- HOYA豪雅
產品構成
工具
送錫槍
技術參數
AC適配器:9.2 x 9.2 x 10.2 in / 6.94 lb
環境工作溫度:10 to 40 C / 50 to 104 F
峰值功率:130 W - 23,5 V
焊嘴與接地間電阻:<2 ohms
焊嘴與接地間電壓:<2 mV RMS
Selectable Temperature:90 to 450 C / 190 to 840 F
Max. and min. temperature:Limit the temperature range in which the operator is allowed to work.
USB-B:Software PC / Firmware update
Voltage (AC):Ref. CA-1QE - 120 V
Package:234 x 234 x 258 mm / 3.15 kg
Temperatue levels:Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
PIN protection:Keep station parameters protected against unauthorized access.
Sleep and Hibernation mode:These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Control Unit:150 x 175 x 145 mm / 2,67 kg
Wire diameter:0.8 to 1.5 mm / 0.02 to 0.07 in
連接工具
AP250-A送錫槍
附件
CC3702集線器