產品名稱：西班牙JBC焊臺DDVE-Q 2 Tools DDE Station With Pneumatic Pump西南Nishizaki西南四川綿陽總代理商

2 Tools DME Station With Pneumatic Pump

The DME manages up to 4 tools simultaneously and is fully compatible with 10 different
JBC tools.
Check below the complete list of compatible tools.
The MVE Pneumatic Desoldering Module is indispensable for a complete desoldering
process. Clean and dry compressed air is required.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
The DMVE works simultaneously with the DR560 Desoldering Iron and the T245 Handle.

產品構成
工具
 吸錫手柄 , 通用型手柄
焊臺
 Stand for DR560
清潔系統
 防靜電安全焊嘴清潔機
技術參數
AC適配器:14.5 x 18.7 x 7.7 in / 23.40 lb
環境工作溫度:10 to 40 C / 50 to 104 F
局域網（以太網）:Remote control / Traceability
峰值功率:160 W per tool ? 23.5 V
焊嘴與接地間電阻:<2 ohms
焊嘴與接地間電壓:<2 mV RMS
真空（6巴）:90% / 680 mmHg / 26.8 inHg
Selectable Temperature:90 to 450 C / 190 to 840 F
Max. and min. temperature:Limit the temperature range in which the operator is allowed to work.
Voltage (AC):ref. DMVE-1QA - 120 V
Package:368 x 474 x 195 mm / 10.62 kg
Temperatue levels:Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
PIN protection:Keep station parameters protected against unauthorized access.
Sleep and Hibernation mode:These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Control Unit:See individual modules
USB-B (rear):Software PC / Traceability
USB-A (front):Firmware update.
Robot:RS-232 remote control or Smart Fume Extractor connection
Dynamic Soldering Profiles:Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC, this new and unique feature allows controlling the heating ramp up rate of the tool to gradually increase the temperature of the
Soldering graphics:Real time visualization of tip temperature and power delivered to the solder joint during soldering process.
10 user interface languages:English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.
PS:Interconnection of up to 5 PSE control units to manage up to 24 tools simultaneously.
Air pressure supply:up to 6 bar
Flow rate (at 6 bar):15 SLPM

連接工具
T210-A
精密用途手柄
PA120-A
小鑷夾
HT420-A
導熱鑷夾
DS360-A
小型吸錫手柄
DR560-A
吸錫手柄
AP250-A
送錫槍
T245-NA
氮氣手柄
T245-A
通用型手柄
T210-NA
精密氮氣手柄
T210-A
精密用途手柄
PA120-A
小鑷夾
HT420-A
導熱鑷夾
DS360-A
小型吸錫手柄
DR560-A
吸錫手柄
AP250-A
送錫槍
T245-NA
氮氣手柄
T245-A
通用型手柄
T210-NA
精密氮氣手柄
T210-A
精密用途手柄
PA120-A
小鑷夾
HT420-A
導熱鑷夾
DS360-A
小型吸錫手柄
DR560-A
吸錫手柄
AP250-A
送錫槍
附件
KNE-A
氮氣套件
GN-A
氮氣生成模塊
CC3702
集線器